01 General description
Electrical powered beacon, designed for use in wind turbines, meteorological and telecommunications towers, cranes, chimneys, bridges or any structure up to 45m high, or for higher heights in combination with medium intensity beacons. Also used in airports, marinas and ports.
With the “SAI-BACKUP” option, it can continue to function in the event of a power cut (see autonomy).
It has the ICAO STAC certification for Type E low intensity beacons.
- Low intensity <45m
- Intensity 32Cd
Power source: Electrical connection (110-240VAC, or 12-30VDC).
Indicated for: Signaling of obstacles up to 45m high.
Autonomy (with “UPS BACKUP” option): Flashing light: 200 hours (starting from a 100% charged battery)
Attention: The autonomy of the battery can be significantly affected depending on the weather conditions.
03 Configuration options
Configurator: Remote IV-CRF configurator option to change the mode and/or operation of the beacon.
Light colors: Red (standard), White, Amber, Green, Blue.
Mode: Flash Light.
Operation: Only night or 24 hours.
Twilight sensor: Integrated.
Flash synchronization: GPS synchronization option.
Failure warning: Option, through “Dry contact” connectable to datalogger.
Telecommunications: It can be integrated into the IV-Manager System environment for beacon management and monitoring from a remote location.
Fijación a tubo vertical (20 a 60mm de diámetro) o a pared.
“New Jersey” horizontal fixing:
For horizontal support (floor, wall crest, etc…).
“Fence” horizontal fixing::
For an horizontal structure (cranes, fences, etc…)
Fixation for aerodrome/airport deflector (45º inclination):
Special for runway head deflectors in aerodromes and airports.
Cone support for fixing on the ground:
Used in aerodromes/airports, mines, etc. It can be attached to the ground with screws.
05 Request information
Complete the form and we will contact you as soon as possible.